slic3r_1.3.0+dfsg1-3+b1_i386.deb


Advertisement

Description

slic3r - G-code generator for 3D printers

Property Value
Distribution Debian Sid
Repository Debian Main i386
Package name slic3r
Package version 1.3.0+dfsg1
Package release 3+b1
Package architecture i386
Package type deb
Installed size 9.55 KB
Download size 2.22 MB
Official Mirror ftp.br.debian.org
Description -

Alternatives

Package Version Architecture Repository
slic3r_1.3.0+dfsg1-3+b1_amd64.deb 1.3.0+dfsg1 amd64 Debian Main
slic3r - - -

Requires

Name Value
libboost thread1.67.0
libboost system1.67.0
libboost filesystem1.67.0
libboost-geometry-utils perl
libc6 >= 2.17
libencode-locale perl
libexpat1 >= 2.0.1
libgcc1 >= 1:3.0
libio-stringy perl
libmath-convexhull-monotonechain perl
libmath-geometry-voronoi perl
libmath-planepath perl
libmoo perl
libstdc++6 >= 5.2
libstorable perl
libtime-hires perl
perl >= 5.28.0-3
perlapi 5.28.0

Download

Type URL
Binary Package slic3r_1.3.0+dfsg1-3+b1_i386.deb
Source Package slic3r

Install Howto

  1. Update the package index:
    # sudo apt-get update
  2. Install slic3r deb package:
    # sudo apt-get install slic3r

Files

Path
/usr/bin/amf-to-stl
/usr/bin/config-bundle-to-config
/usr/bin/dump-stl
/usr/bin/estimate-gcode-time
/usr/bin/gcode_sectioncut
/usr/bin/pdf-slices
/usr/bin/send-gcode
/usr/bin/slic3r
/usr/bin/split_stl
/usr/bin/stl-to-amf
/usr/bin/view-mesh
/usr/bin/view-toolpaths
/usr/bin/wireframe
/usr/lib/slic3r/Slic3r.pm
/usr/lib/slic3r/Slic3r/Config.pm
/usr/lib/slic3r/Slic3r/ExPolygon.pm
/usr/lib/slic3r/Slic3r/ExtrusionLoop.pm
/usr/lib/slic3r/Slic3r/ExtrusionPath.pm
/usr/lib/slic3r/Slic3r/Flow.pm
/usr/lib/slic3r/Slic3r/GUI.pm
/usr/lib/slic3r/Slic3r/Geometry.pm
/usr/lib/slic3r/Slic3r/Layer.pm
/usr/lib/slic3r/Slic3r/Line.pm
/usr/lib/slic3r/Slic3r/Model.pm
/usr/lib/slic3r/Slic3r/Point.pm
/usr/lib/slic3r/Slic3r/Polygon.pm
/usr/lib/slic3r/Slic3r/Polyline.pm
/usr/lib/slic3r/Slic3r/Print.pm
/usr/lib/slic3r/Slic3r/SVG.pm
/usr/lib/slic3r/Slic3r/Surface.pm
/usr/lib/slic3r/Slic3r/Test.pm
/usr/lib/slic3r/Slic3r/XS.pm
/usr/lib/slic3r/Slic3r/GCode/ArcFitting.pm
/usr/lib/slic3r/Slic3r/GCode/MotionPlanner.pm
/usr/lib/slic3r/Slic3r/GCode/PressureRegulator.pm
/usr/lib/slic3r/Slic3r/GCode/Reader.pm
/usr/lib/slic3r/Slic3r/GCode/VibrationLimit.pm
/usr/lib/slic3r/Slic3r/GUI/2DBed.pm
/usr/lib/slic3r/Slic3r/GUI/3DScene.pm
/usr/lib/slic3r/Slic3r/GUI/AboutDialog.pm
/usr/lib/slic3r/Slic3r/GUI/BedShapeDialog.pm
/usr/lib/slic3r/Slic3r/GUI/BonjourBrowser.pm
/usr/lib/slic3r/Slic3r/GUI/ColorScheme.pm
/usr/lib/slic3r/Slic3r/GUI/ConfigWizard.pm
/usr/lib/slic3r/Slic3r/GUI/Controller.pm
/usr/lib/slic3r/Slic3r/GUI/MainFrame.pm
/usr/lib/slic3r/Slic3r/GUI/Notifier.pm
/usr/lib/slic3r/Slic3r/GUI/OptionsGroup.pm
/usr/lib/slic3r/Slic3r/GUI/Plater.pm
/usr/lib/slic3r/Slic3r/GUI/Preferences.pm
/usr/lib/slic3r/Slic3r/GUI/Preset.pm
/usr/lib/slic3r/Slic3r/GUI/PresetEditor.pm
/usr/lib/slic3r/Slic3r/GUI/PresetEditorDialog.pm
/usr/lib/slic3r/Slic3r/GUI/ProgressStatusBar.pm
/usr/lib/slic3r/Slic3r/GUI/Projector.pm
/usr/lib/slic3r/Slic3r/GUI/ReloadDialog.pm
/usr/lib/slic3r/Slic3r/GUI/SLAPrintOptions.pm
/usr/lib/slic3r/Slic3r/GUI/Controller/ManualControlDialog.pm
/usr/lib/slic3r/Slic3r/GUI/Controller/PrinterPanel.pm
/usr/lib/slic3r/Slic3r/GUI/OptionsGroup/Field.pm
/usr/lib/slic3r/Slic3r/GUI/Plater/2D.pm
/usr/lib/slic3r/Slic3r/GUI/Plater/2DToolpaths.pm
/usr/lib/slic3r/Slic3r/GUI/Plater/3D.pm
/usr/lib/slic3r/Slic3r/GUI/Plater/3DPreview.pm
/usr/lib/slic3r/Slic3r/GUI/Plater/LambdaObjectDialog.pm
/usr/lib/slic3r/Slic3r/GUI/Plater/ObjectCutDialog.pm
/usr/lib/slic3r/Slic3r/GUI/Plater/ObjectPartsPanel.pm
/usr/lib/slic3r/Slic3r/GUI/Plater/ObjectSettingsDialog.pm
/usr/lib/slic3r/Slic3r/GUI/Plater/OverrideSettingsPanel.pm
/usr/lib/slic3r/Slic3r/GUI/Plater/SplineControl.pm
/usr/lib/slic3r/Slic3r/Geometry/Clipper.pm
/usr/lib/slic3r/Slic3r/Print/GCode.pm
/usr/lib/slic3r/Slic3r/Print/Object.pm
/usr/lib/slic3r/Slic3r/Print/Simple.pm
/usr/lib/slic3r/Slic3r/Print/State.pm
/usr/lib/slic3r/Slic3r/Print/SupportMaterial.pm
/usr/lib/slic3r/Slic3r/Test/SectionCut.pm
/usr/lib/slic3r/auto/Slic3r/XS/XS.bs
/usr/lib/slic3r/auto/Slic3r/XS/XS.so
/usr/share/applications/slic3r.desktop
/usr/share/doc/slic3r/README.md.gz
/usr/share/doc/slic3r/changelog.Debian.gz
/usr/share/doc/slic3r/changelog.Debian.i386.gz
/usr/share/doc/slic3r/copyright
/usr/share/doc/slic3r/examples/post-processing/decimate.pl
/usr/share/doc/slic3r/examples/post-processing/fan_kickstart.py
/usr/share/doc/slic3r/examples/post-processing/filament-weight.pl
/usr/share/doc/slic3r/examples/post-processing/flowrate.pl
/usr/share/doc/slic3r/examples/post-processing/prowl-notification.pl
/usr/share/doc/slic3r/examples/post-processing/strip-toolchange.pl
/usr/share/doc/slic3r/examples/post-processing/z-every-line.pl
/usr/share/icons/hicolor/128x128/apps/slic3r.png
/usr/share/icons/hicolor/192x192/apps/slic3r.png
/usr/share/man/man1/amf-to-stl.1.gz
/usr/share/man/man1/config-bundle-to-config.1.gz
/usr/share/man/man1/dump-stl.1.gz
/usr/share/man/man1/gcode_sectioncut.1.gz
/usr/share/man/man1/pdf-slices.1.gz
/usr/share/man/man1/slic3r.1.gz
/usr/share/man/man1/split_stl.1.gz
/usr/share/man/man1/stl-to-amf.1.gz
/usr/share/man/man1/view-mesh.1.gz
/usr/share/man/man1/view-toolpaths.1.gz
/usr/share/man/man1/wireframe.1.gz
/usr/share/mime/packages/slic3r.xml
/usr/share/slic3r/Slic3r.icns
/usr/share/slic3r/Slic3r.ico
/usr/share/slic3r/Slic3r.png
/usr/share/slic3r/Slic3r_128px.png
/usr/share/slic3r/Slic3r_192px.png
/usr/share/slic3r/Slic3r_192px_transparent.png
/usr/share/slic3r/add.png
/usr/share/slic3r/application_view_tile.png
/usr/share/slic3r/arrow_down.png
/usr/share/slic3r/arrow_in.png
/usr/share/slic3r/arrow_left.png
/usr/share/slic3r/arrow_out.png
/usr/share/slic3r/arrow_redo.png
/usr/share/slic3r/arrow_refresh.png
/usr/share/slic3r/arrow_right.png
/usr/share/slic3r/arrow_rotate_anticlockwise.png
/usr/share/slic3r/arrow_rotate_clockwise.png
/usr/share/slic3r/arrow_undo.png
/usr/share/slic3r/arrow_up.png
/usr/share/slic3r/box.png
/usr/share/slic3r/brick.png
/usr/share/slic3r/brick_add.png
/usr/share/slic3r/brick_delete.png
/usr/share/slic3r/brick_go.png
/usr/share/slic3r/bricks.png
/usr/share/slic3r/building.png
/usr/share/slic3r/bullet_black.png
/usr/share/slic3r/bullet_blue.png
/usr/share/slic3r/bullet_green.png
/usr/share/slic3r/bullet_red.png
/usr/share/slic3r/bullet_white.png
/usr/share/slic3r/cog.png
/usr/share/slic3r/cog_go.png
/usr/share/slic3r/control_pause.png
/usr/share/slic3r/control_pause_blue.png
/usr/share/slic3r/control_play.png
/usr/share/slic3r/control_play_blue.png
/usr/share/slic3r/control_stop.png
/usr/share/slic3r/control_stop_blue.png
/usr/share/slic3r/cross.png
/usr/share/slic3r/delete.png
/usr/share/slic3r/disk.png
/usr/share/slic3r/error.png
/usr/share/slic3r/film.png
/usr/share/slic3r/funnel.png
/usr/share/slic3r/gcode.icns
/usr/share/slic3r/gcode.ico
/usr/share/slic3r/hourglass.png
/usr/share/slic3r/house.png
/usr/share/slic3r/infill.png
/usr/share/slic3r/joystick.png
/usr/share/slic3r/layers.png
/usr/share/slic3r/lorry_add.png
/usr/share/slic3r/lorry_go.png
/usr/share/slic3r/lorry_import.png
/usr/share/slic3r/map_add.png
/usr/share/slic3r/note.png
/usr/share/slic3r/package.png
/usr/share/slic3r/package_green.png
/usr/share/slic3r/page_white_go.png
/usr/share/slic3r/plugin.png
/usr/share/slic3r/plugin_add.png
/usr/share/slic3r/plugin_go.png
/usr/share/slic3r/printer_empty.png
/usr/share/slic3r/script.png
/usr/share/slic3r/shape_flip_horizontal.png
/usr/share/slic3r/shape_handles.png
/usr/share/slic3r/shape_ungroup.png
/usr/share/slic3r/slt.ico
/usr/share/slic3r/spool.png
/usr/share/slic3r/stl.icns
/usr/share/slic3r/tag_blue.png
/usr/share/slic3r/textfield.png
/usr/share/slic3r/tick.png
/usr/share/slic3r/time.png
/usr/share/slic3r/variable_layer_height.png
/usr/share/slic3r/wand.png
/usr/share/slic3r/wrench.png
/usr/share/slic3r/zoom.png
/usr/share/slic3r/zoom_in.png
/usr/share/slic3r/zoom_out.png
/usr/share/zsh/vendor-completions/_slic3r

Changelog

2018-11-08 - Chow Loong Jin <hyperair@debian.org>
slic3r (1.3.0+dfsg1-3) unstable; urgency=medium
* [b61cf9b] Import patch to fix admesh compilation bug (Closes: #907346)
2018-05-28 - Chow Loong Jin <hyperair@debian.org>
slic3r (1.3.0+dfsg1-2) unstable; urgency=medium
* [b128e8f] Update Add-usr-lib-slic3r-to-lib-search-path.patch for new scripts
* [a6a82a1] Fix executable .ico and .icns files
* [6d723f8] Update Vcs-* addresses for salsa port
* [337205f] Drop local::lib usage from util scripts
2018-05-26 - Chow Loong Jin <hyperair@debian.org>
slic3r (1.3.0+dfsg1-1) unstable; urgency=medium
* New upstream release
* [75ac14d] Update patches and drop upstreamed ones
* [7052816] Add patch to use system expat
* [b1cb899] Fix Move-Slic3r-data-to-usr-share-slic3r.patch
$var is supposed to be a sub reference, not a string.
2018-01-05 - Chow Loong Jin <hyperair@debian.org>
slic3r (1.2.9+dfsg-9) unstable; urgency=medium
* [1ae29f4] Patch "use lib" line in all installed binaries (Closes: #886125)
2017-10-09 - Chow Loong Jin <hyperair@debian.org>
slic3r (1.2.9+dfsg-8) unstable; urgency=medium
* [c1b29a0] Acknowledge NMU (Closes: #869360)
2017-10-03 - Chow Loong Jin <hyperair@debian.org>
slic3r (1.2.9+dfsg-7) unstable; urgency=medium
* [e77c05d] Fill up slic3r.desktop so that it can be used to open stl files
* [9438384] Import patches to fix bugs.
- Workaround missing GL_MULTISAMPLE macro (Closes: #872273)
- Fix importing binary STLs on big-endian architectures
* [99cbb39] Bump Standards-Version
2017-08-06 - gregor herrmann <gregoa@debian.org>
slic3r (1.2.9+dfsg-6.1) unstable; urgency=medium
* Non-maintainer upload.
* Fix "missing dependency on perlapi-*":
add override_dh_perl in debian/rules to make dh_perl search for perl
modules in the private directory as well.
(Closes: #869360)
2016-11-03 - Chow Loong Jin <hyperair@debian.org>
slic3r (1.2.9+dfsg-6) unstable; urgency=medium
* [9db9b59] Shift perl modules into private directories.
This is preparation for co-installation with slic3r-prusa.
* [888531e] Patch slic3r bin script to look in private dirs
2016-09-17 - Rock Storm <rockstorm@gmx.com>
slic3r (1.2.9+dfsg-5) unstable; urgency=medium
* Fix spelling errors.
2016-09-16 - Rock Storm <rockstorm@gmx.com>
slic3r (1.2.9+dfsg-4) unstable; urgency=medium
* Team upload.
* [9adee80] Fix incompatible change in Boost 1.60
* [cc330e0] Adapt to GCC 6. (Closes: #811700)
* [511ee63] Upgrade to Standards-Version 3.9.8

See Also

Package Description
slice_1.3.8-14_all.deb Extract out pre-defined slices of an ASCII file
slick-greeter_1.2.4-2_i386.deb Slick-looking LightDM greeter
slides-doc_1.0.1-15_all.deb Python-based Slide Maker -- documentation
slim_1.3.6-5.1_i386.deb desktop-independent graphical login manager for X11
slime_2.23+dfsg-2_all.deb Superior Lisp Interaction Mode for Emacs (client)
slimevolley-data_2.4.2+dfsg-2_all.deb unrealistic 2D volleyball simulation - data files
slimevolley_2.4.2+dfsg-2+b1_i386.deb unrealistic 2D volleyball simulation
slimit_0.8.1-3_all.deb JavaScript minifier/parser in Python
slingshot_0.9-2_all.deb simple 2D shooting strategy game set in space, with gravity
slinkwatch_1.0-2+b20_i386.deb automatic maintenance of Suricata monitoring interfaces
slirp4netns_0.2.1-1_i386.deb User-mode networking for unprivileged network namespaces
slirp_1.0.17-8_i386.deb SLIP/PPP emulator using a dial up shell account
sloccount_2.26-5.2_i386.deb programs for counting physical source lines of code (SLOC)
slony1-2-bin_2.2.7-2_i386.deb replication system for PostgreSQL: daemon and administration tools
slony1-2-doc_2.2.7-2_all.deb Slony-I documentation
Advertisement
Advertisement