atm-tools_2.5.1-1.5_amd64.deb


Advertisement

Description

atm-tools - Base programs for ATM in Linux, the net-tools for ATM

Distribution: Debian 8 (Jessie)
Repository: Debian Main amd64
Package name: atm-tools
Package version: 2.5.1
Package release: 1.5
Package architecture: amd64
Package type: deb
Installed size: 974 B
Download size: 337.14 KB
Official Mirror: ftp.br.debian.org
This package provides all the basic programs needed for setting up, monitoring and tuning ATM networks. Such as: * atmsigd, an ATM signal daemon that implements the ATM UNI protocol. * atmtcp, a tool to setup ATM over TCP connections. * atmarpd, an implementation of the ATMARP protocol (RFC1577, RFC1755) * zeppelin, an ATM LAN Emulation client daemon * les and bus, ATM LAN Emulation service daemons Notice that upstream still flags these tools as experimental software and says that there is still a number of known bugs and issues. The software is, however, in productive use at a number of sites and is working reliably.

Alternatives

    Download

    Source package: linux-atm

    Install Howto

    1. Update the package index:
      # sudo apt-get update
    2. Install atm-tools deb package:
      # sudo apt-get install atm-tools

    Files

    • /etc/atmsigd.conf
    • /etc/init.d/atm
    • /sbin/atmarp
    • /sbin/atmarpd
    • /usr/bin/aread
    • /usr/bin/atmdiag
    • /usr/bin/atmdump
    • /usr/bin/atmswitch
    • /usr/bin/awrite
    • /usr/bin/saaldump
    • /usr/bin/sonetdiag
    • /usr/bin/svc_recv
    • /usr/bin/svc_send
    • /usr/bin/ttcp_atm
    • /usr/sbin/atmaddr
    • /usr/sbin/atmloop
    • /usr/sbin/atmsigd
    • /usr/sbin/atmtcp
    • /usr/sbin/bus
    • /usr/sbin/enitune
    • /usr/sbin/esi
    • /usr/sbin/ilmid
    • /usr/sbin/lecs
    • /usr/sbin/les
    • /usr/sbin/mpcd
    • /usr/sbin/zeppelin
    • /usr/sbin/zntune
    • /usr/share/doc/atm-tools
    • /usr/share/doc/libatm1/BUGS
    • /usr/share/doc/libatm1/README
    • /usr/share/doc/libatm1/README.tc
    • /usr/share/man/man4/atmsigd.conf.4.gz
    • /usr/share/man/man7/qos.7.gz
    • /usr/share/man/man7/sap.7.gz
    • /usr/share/man/man8/aread.8.gz
    • /usr/share/man/man8/atm-tools.8.gz
    • /usr/share/man/man8/atmaddr.8.gz
    • /usr/share/man/man8/atmarp.8.gz
    • /usr/share/man/man8/atmarpd.8.gz
    • /usr/share/man/man8/atmdiag.8.gz
    • /usr/share/man/man8/atmdump.8.gz
    • /usr/share/man/man8/atmloop.8.gz
    • /usr/share/man/man8/atmsigd.8.gz
    • /usr/share/man/man8/atmtcp.8.gz
    • /usr/share/man/man8/awrite.8.gz
    • /usr/share/man/man8/bus.8.gz
    • /usr/share/man/man8/enitune.8.gz
    • /usr/share/man/man8/esi.8.gz
    • /usr/share/man/man8/ilmid.8.gz
    • /usr/share/man/man8/lecs.8.gz
    • /usr/share/man/man8/les.8.gz
    • /usr/share/man/man8/mpcd.8.gz
    • /usr/share/man/man8/saaldump.8.gz
    • /usr/share/man/man8/sonetdiag.8.gz
    • /usr/share/man/man8/ttcp_atm.8.gz
    • /usr/share/man/man8/zeppelin.8.gz
    • /usr/share/man/man8/zntune.8.gz

    Changelog

    2012-09-22 - Salvatore Bonaccorso <carnil@debian.org> linux-atm (1:2.5.1-1.5) unstable; urgency=low * Non-maintainer upload. * Correct directory in libatm1-dev.postinst. Correct the directory checked for the directory symlink migration to be /usr/share/doc/libatm1-dev for the libatm1-dev binary package. It wrongly refered to /usr/share/doc/atm-tools. (Closes: #687857)

    2012-07-03 - Luk Claes <luk@debian.org> linux-atm (1:2.5.1-1.4) unstable; urgency=low * Non-maintainer upload. * Make build targets executable in parallel (Closes: #674611).

    2011-10-30 - Marco d'Itri <md@linux.it> linux-atm (1:2.5.1-1.3) unstable; urgency=low * Non-maintainer upload. * Package converted to multiarch. * Support sendsigs.omit.d/ in /run and depend on initscripts >= 2.88dsf-13.3. (Closes: #633029) * Install the changelogs only in libatm1. * Removed the K links of the atmarpd initscript, there is no point in stopping the daemon.

    2010-01-02 - Marco d'Itri <md@linux.it> linux-atm (1:2.5.1-1.2) unstable; urgency=low * Non-maintainer upload. * Also Build-Depend on autoconf, automake, libtool. (Closes: #563306) * Prevent sendsigs from killing atmarpd. (Closes: #62144)

    2009-12-24 - Marco d'Itri <md@linux.it> linux-atm (1:2.5.1-1.1) unstable; urgency=low * Non-maintainer upload. * New upstream release. (Closes: #463401) * Removed the atm-dev dummy package. (Closes: #321826) * Fixed typos in some man pages. (Closes: #325072) * Autoreconf on build. (Closes: #535736, #549144) * Do not restart the init script on upgrades. (Closes: #303069) * Build with -fno-strict-aliasing just to be sure. * Added a .symbols file for libatm1. * Cleaned up debian/rules and updated to modern best practices. * Slightly cleaned up the init script. * Upgraded debhelper level to 5. * Merged back br2684ctl from the standalone source package. * Added an epoch to be able to replace the standalone br2684ctl package which has version 20040226-1.

    2008-03-31 - Petter Reinholdtsen <pere@debian.org> linux-atm (2.4.1-17.2) unstable; urgency=low * Non-maintainer upload to fix RC bug. * Add LSB dependency header to init.d scripts (Closes: #468459).

    2007-07-19 - Pierre Habouzit <madcoder@debian.org> linux-atm (2.4.1-17.1) unstable; urgency=low * Non-maintainer upload. * Add patches/20_missing_includes.dpatch to add missing #include <linux/types.h> needed with last linux-libc-dev (Closes: #428943).

    2005-03-17 - Peter De Schrijver (p2) <p2@mind.be> linux-atm (2.4.1-17) unstable; urgency=low * Fix build problem with gcc 4.0 (Closes: )

    2004-07-15 - Peter De Schrijver (p2) <p2@mind.be> linux-atm (2.4.1-16) unstable; urgency=low * Fix build problem with gcc 3.4 (Closes: #259422)

    2004-04-04 - Peter De Schrijver (p2) <p2@mind.be> linux-atm (2.4.1-15) unstable; urgency=low * Updated descriptions (Closes: #239161)

    Advertisement
    Advertisement